Evt 4000e User Manual

Dearest User: 1. Thank you for choosing the EVT Electric Scooter. We hope you have a pleasant time riding it. This manual will help you understand the operation, basic inspection and maintenance of your scooter. It will also explain how to get the best performance and how to make your riding safer. The contents of.

• SERVICE MANUAL SERVICE MANUAL EVT- 4000e EVT- 4000e. • Table of Contents 1. Headlight Assembly 15.

Front Fork 2. Headlight Bulb 16. Rear Shock Absorber 3. Signal Light Bulb 17. Front Brake Hose 4.

Instrument Panel 18. Rear Brake Hose 5.

Speedometer Cable 19. Front Caliper 6. Speedometer Gear 20.

• Headlight Assembly Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release two mounting screws on the instrument panel, and then release three screws on the head light assembly. Follow with the reversed steps to restore. • Headlight Bulb Tools Required: Phillips Screwdriver Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover. Release two mounting screws on the instrument panel. Follow with the reversed steps to restore. • Signal Light Bulb Tools Required: Phillips screwdriver; T-bend socket wrench, 8mm Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release signal light bulb set for replacement. Follow with the reversed steps to restore.

• Instrument Panel Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release two mounting screws on the instrument panel. Release the nut for the speedometer. Follow with the reversed steps to restore. • Speedometer Cable Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover. Release two mounting screws on the instrument panel. Release the nut for the speedometer. Release three screws on the front cover. • Speedometer Gear Tools Required: Box wrench, 17mm Time: Allow 10 minutes for procedure 1.

Release front axle nut. Remove the front wheel. Follow with the reversed steps to restore. • Key Switch Tools Required: Phillips screwdriver; T-bend socket wrenches, 8mm and 10mm Time: Allow 10 minutes for procedure 1. Release three screws on the front cover. Release six screws on the front fender.

Release three screws on the glove box. • Horn Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the front cover. Release two connectors on the horn. Release the mounting screws on the horn. Follow with the reversed steps to restore.

• Main Control Cord Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover, two mounting screws on the instrument panel, three screws on the headlight, three screws on the front cover and two screws on the right trim. • Flasher Relay Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover, and remove the rubber sleeve so can see the 2 pin connector for the flasher relay. Follow with the reversed steps to restore.

• DC to DC Converter Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release three screws on the front panel. Release two screws and 4-pin connector for the DC to DC converter. Follow with the reversed steps to restore. • Left Handle Switch Tools Required: Phillips screwdriver; open-end wrench, 14mm Time: Allow 10 minutes for procedure 1. Remove left rear view mirror and release three screws on the handle cover. Release two mounting screws on the instrument panel.

Release two screws on the left handle switch. • Right Handle Switch Tools Required: Phillips screwdriver; Open-end wrench, 14mm Time: Allow 10 minutes for procedure 1. Drivers Education Hamilton Southeastern. Remove the right rear mirror and three screws on the handle cover. Release two mounting screws on the instrument panel. Release two screws on the right handle switch and one screw for the throttle cable. • Brake Master Cylinder Tools Required: Phillips screwdriver; Box wrench, 12mm; Hex key wrench, 5mm Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover, two mounting screws on the instrument panel and three screws on the headlight assembly. • Front Fork Tools Required: Phillips screwdriver; T-bend socket wrench, 8mm; Box wrenches, 14mm and 17mm; Y-bend socket wrench, 12mm Time: Allow 10 minutes for procedure 1. Release three screws on the front cover. Release six screws on the front fender. • Rear Shock Absorber Tools Required: Phillips screwdriver; T-bend socket wrenches, 12mm and 14mm Time: Allow 10 minutes for procedure 1. Release two screws on the trim on each left and right side.

Release two screws on the left shock absorber. • Front Brake Hose Tools Required: Phillips screwdriver; Box wrench, 12mm; diagonal cutting pliers Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover.

Release two screws on the right reservoir. Release the screw on the brake hose of the front wheel Avoid fuel leaking to the pad. • Rear Brake Hose Tools Required: Phillips screwdriver; Box wrench, 12mm; Diagonal cutting pliers Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release two screws on the left reservoir. Release the screw on the brake hose of the rear wheel Avoid fuel leaking to the pad. • Front Caliper Tools Required: Phillips screwdriver; Box wrench, 12mm; Y-bend socket wrench, 12mm Time: Allow 10 minutes for procedure 1.

Release three screws on the handle cover. Release the screw on the front caliper.

Avoid fluid leaking to the pad. • Rear Caliper Tools Required: Phillips screwdriver; Box wrench, 12mm; Y-bend socket wrench, 12mm Time: Allow 10 minutes for procedure 1. Release three screws on the handle cover. Release the screw on the rear caliper. Avoid fluid leaking to the pad. • Controller Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Varsham Mp3 Audio Songs Free Download.

Release two screws on the right side trim. Release the connectors of controller wire harness (1 black, 1 red, 1 black 9-pin, 1 white 9-pin).

Release the copper nut of the throttle cable and pull it out. Put a nail through the hold to prevent pillar from drawing back.

• Motor Tools Required: Phillips screwdriver; Open-end wrench, 24mm; Y-bend socket wrench, 12mm; Diagonal cutting pliers Time: Allow 10 minutes for procedure 1. Release the black connector of the motor cord. Cut off the band. Release three screws on the motor cord cover. • Rear Brake Disk Tools Required: Phillips screwdriver; Open-end wrench, 24mm; Y-bend socket wrench, 12mm; Hex key wrench, 6mm; Diagonal cutting pliers Time: Allow 10 minutes for procedure 1.

Releaase the black connector of the motor cord. Cut off the band. • Front Brake Disk Tools Required: Box wrench, 17mm; Hex key wrench, 6mm Time: Allow 10 minutes for procedure 1.

Release the screw for the front axle nut to remove the front wheel. Release three screws on the disk. Follow with the reversed steps to restore. • Rear Light Assembly Tools Required: Phillips screwdriver; Hex-key wrench, 6mm; Y-bend socket wrench, 10mm; T-bend socket wrench, 10mm Time: Allow 10 minutes for procedure 1. Release three screws on the tail compartment.

Release four screws on the trim on the left and right sides. • Rear Lamp Bulb Tools Required: Phillips screwdriver Time: Allow 10 minutes for procedure 1. Release two screws on the rear lamp cover.

Remove the cover to replace the bulb. Follow with the reversed steps to restore. • Troubleshooting Conditions Inspect Repair Display Panel indicator light is 1. The power will cut off while 1.

Release the brake and then working, but there is no move braking. Gently twisting throttle. While twisting throttle. Brake switch breakdown. See your agent.

• Part Summary FIG.01 FRONT WHEEL Item NO. Description Qty.

020 RIM, FRONT (DOT) 6240-00001 TIRE TUBELESS 6162-63004 BEARING 6222-351671 OIL SEAL 6279-100117 SPEEDOMETER GEAR SET 0241-10601 TIRE VALVE 0241-10701 BRAKE DISK, FRONT 6109-080171 SCREW 6142-080855 NUT, DOME HEAD 0241-10311 COLLAR, LARGE 0241-10321. • Part Summary (cont’d) FIG.02 FORK Item NO. Description Qty. 0241-30101 FRONT FORK SET 0241-30501 CALIPER, FRONT 6112-080258 SCREW, NYLOK 0241-30401 RACE, BALL SET 0241-71601 FENDER, FRONT 6112-060208 SCREW, HEX HEAD 0241-30601 CABLE GUIDE, LEFT 0241-30602 CABLE GUIDE, RIGHT 6112-060126 SCREW, HEX HEAD. • Part Summary (cont’d) FIG.03 REAR WHEEL Item NO. Description Qty.

02A9-05000101 MOTOR ASSY. 0241-20201 BRAKE DISC, REAR 6240-00001 TIRE, TUBELESS 6109-080201 SCREW, SOCKET 0241-10601 TIRE VALVE 6248-00001 CONNECTOR, BLACK 024 REAR FORK SET 6113-103001 BOLT 6143-100801 NUT, DOME 61 WASHER 0299-010016C3. • Part Summary (cont’d) FIG.04 FRAME Item NO. Description Qty. 0241-501011 FRAME 6266-100103 MAIN STAND 6111-081255 BOLT 6142-080855 NUT, FLANGE 0241-50302 SPRING, MAIN STAND 6266-200103 SIDE STAND 0241-50801 LOCK SET 6111-060408 SCREW, HEX 6111-060185 SCREW, HEX 6123-060251 SCREW, HEX. • Part Summary (cont’d) FIG.05 CONTROLLER Item NO.

Description Qty. 022 CONTROLLER 6248-00002 CONNECTOR, RED 6126-052005 SCREW 6255-00001 HORN 6112-060126 SCREW, HEX HEAD 6141-060608 NUT, HEX FLANGE 021 DC-DC CONVERTER 6126-051031 SCREW 6140-0-05000101 MAIN CONTROL CORD 6256-00280 TIE BAND 6256-00200 TIE BAND 6256-00120. • Part Summary (cont’d) FIG.06 HANDLE BAR Item NO.

Description Qty. 0241-40101 HANDLE 6170-100110 GRIP, LEFT 6170-100210 GRIP, RIGHT 0241-40701 HANDLE SWITCH, LEFT 020 HANDLE SWITCH, RIGHT 0241-40901 MASTER CYLINDER, LEFT 0241-41001 MASTER CYLINDER, RIGHT 0241-41101 BRAKE HOSE, LEFT 0241-41201 BRAKE HOSE, RIGHT 0241-41901. • Part Summary (cont’d) FIG.07 METER/HEADLIGHT Item NO. Description Qty.

0241-40202 HANDLE COVER, UPPER (SILVER) 0241-40203 HANDLE COVER, UPPER (RED) 0241-40204 HANDLE COVER, UPPER (GREEN) 0241-40205 HANDLE COVER, UPPER (BLUE) 0241-40208 HANDLE COVER, UPPER (DK GREEN) 0241-40301 HANDLE COVER, LOWER 020 HEADLIGHT COMP 020. • Part Summary (cont’d) FIG.08 TAIL LAMP Item NO.

Description Qty. 020 TAIL LIGHT SET 0241-71511 LICENSE PLATE HOLDER 6112-060208 SCREW, HEX FLANGE 0241-41411 SIGNAL LIGHT, REAR (LEFT) 0241-41412 SIGNAL LIGHT, REAR (RIGHT) 6141-060608 NUT, HEX FLANGE. • Part Summary (cont’d) FIG.09 SEAT Item NO. Description Qty. 0241-70101 SEATBOX RIM 0241-70201 HINGE, SEAT 6110-060158 SCREW, HEX HEAD 0241-70301 PIN, SEAT 0241-70401 SEAT 0241-723011 BRACKET, SEAT 6141-060608 NUT, HEX FLANGE 0241-72501 BATTERY COVER 6111-060408 SCREW, HEX 0241-72201 HANGER, HELMET. • Part Summary (cont’d) FIG.10 FRONT COVER Item NO. Description Qty.

0241-70701 TRIM, FRONT 0241-70802 COVER, FRONT (SILVER) 0241-70803 COVER, FRONT (RED) 0241-70804 COVER, FRONT (GREEN) 0241-70805 COVER, FRONT (BLUE) 0241-70808 COVER, FRONT (DK GREEN) 6132-501511 SCREW, TAPPING 61 SCREW, TAPPING 61 WASHER. • Part Summary (cont’d) FIG.11 SIDE COVER Item NO. Description Qty. 0241-70502 COVER, LEFT (SILVER) 0241-70503 COVER, LEFT (RED) 0241-70504 COVER, LEFT (GREEN) 0241-70505 COVER, LEFT (BLUE) 0241-70508 COVER, LEFT (DK GREEN) 6132-501511 SCREW, TAPPING 0241-70602 COVER, RIGHT (SILVER) 0241-70603 COVER, RIGHT (RED) 0241-70604.

• Part Summary (cont’d) FIG.12 FOOTREST BOARD Item NO. Description Qty.

0241-71301 FLOOR MAT 6112-060257 SCREW, HEX FLANGE 0241-71402 COVER, CENTER (SILVER) 0241-71403 COVER, CENTER (RED) 0241-71404 COVER, CENTER (GREEN) 0241-71405 COVER, CENTER (BLUE) 0241-71408 COVER, CENTER (DK GREEN) 0241-71901 TRIM, LEFT 6132-501511. • Part Summary (cont’d) FIG.13 TAIL Item NO. Description Qty.

0241-71811 TAIL BRACKET 0241-71822 TAIL COVER, UPPER (SILVER) 0241-71823 TAIL COVER, UPPER (RED) 0241-71824 TAIL COVER, UPPER (GREEN) 0241-71825 TAIL COVER, UPPER (BLUE) 0241-71828 TAIL COVER, UPPER (DK GREEN) 0241-71831 TAIL COVER, LOWER 0241-71841. • Part Summary (cont’d) FIG.14 BATTERY Item NO. Description Qty. 181-400-10 BATTERY LEV -040621 BATTERY CORD SET (LONG) 6261-050621 BATTERY CORD SET (SHORT) 020 CONNECTION CORD, BATTERY 028 CHARGER. • Accessories Item NO. Description 020 4000E STORAGE CASE, YELLOW 021 4000E STORAGE CASE, SILVER 022 4000E STORAGE CASE, RED 023 4000E STORAGE CASE, LIGHT BLUE 024 4000E STORAGE CASE, BROWN 025 4000E STORAGE CASE, GRASSY GREEN 026 4000E STORAGE CASE, WHITE 027 4000E STORAGE CASE, BLACK 028.

Mileage 6903 Seller type Trade Colour Yellow Engine size 0 Description 2004 EVT4000 ELECTRIC SCOOTER EVERY CHEAP TO RUN 6903 MILES TOP SPEED 30 MPH CHECK IT OUT ON OUR SITE ON PIC 9 DISTANCE BETWEEN CHARGES APPROX 28 MILES MOTD ZERO TAX ECONOMY MODE MUST BE SEEN GREAT FUN Electric Power – Skip the Gas Pump Clean, Quiet and Smart Simple Power – Plugs into any standard household outlet Practical Range: Up to 30 miles* per charge with a maximum speed of 30 mph *Mileage range assumes a 165 lbs rider. Range will vary depending on terrain, weather conditions and driving style. Futuristic race car styling works great with the future of electric vehicle transportation. The modern, aerodynamic look of the 4000e plays off the innovative technology used to power the scooter: the Gen II™ Hub Motor. Zero emissions.

Bravo's EVT-4000e Scooters are DOT approved for use on public roads.