Metabo Ks 216 M Laser Cut Manual

Posted on

Are you looking for the the instruction manual of the Metabo KS 216M Lasercut? View the user manual of this product directly and completely free.

Metabo Ks 216 M Laser Cut ManualMetabo Ks 216 M Laser Cut Manual

Contents • • • Table of contents: • General Description and characteristics of the miter saw Metabo KGS 216 M • Operating and safety instructions for miter saws Metabo KGS 216 M General Description and characteristics of the miter saw Metabo KGS 216 M Miter Saw Metabo KGS 216 M is suitable for work with materials such as wood, plastic, various extruded materials, decorative items for decoration. Professional-grade model. Suitable for internal finishing work premises or for the manufacture of different elements pet master.

Miter Saw Metabo KGS 216 M motor is equipped with a system of protection against overheating and overloading. Thanks to this tool is suitable for intensive use.

The model has a rubberized handle, small size and weight. Availability broach function allows the cut material 305 mm wide. Arduino Delphi Serial Communication Ppt. The saw is equipped with a depth of cut.

The table has to be placed accurately scale operation angle. The table itself is made of cast aluminum, this material has a high resistance to mechanical shock, which enhances its service life.

Also available there are the cut line indicator and illumination. Table functionality allows to lengthen it without using special tools, this makes it possible to work with long workpieces. Characteristics: • Motor power - 1,5 kW. • The number of revolutions per minute - 5000. • Saw blade size - 216 x 30 mm. • Size of cut at 0o - 305/65 mm.

• Size of cut at 45o - 205/36 mm. • Tilt angle - 45 degrees. • rotation angle - 47o.

• unit weight - 14 kg. Operating and safety instructions for miter saws Metabo KGS 216 M General rules for use of the tool, to ensure safety during operation: • Place of work necessary to keep clean. Often the cause of accidents at work with the miter saw is a mess on the table. • It is not recommended to operate the machine, if the reduced ability to concentrate. Taekwondo Techniques Martial Art. • When installing the machine it is necessary to take into account all environmental factors. • During operation, it is important to maintain balance.

• Do not operate near flammable materials. • It is necessary to maintain a safe distance from the blade, to maintain a distance from the rotating parts. • It is forbidden to brake the saw blade, pushing it sideways. • During the repair and maintenance of the machine, make sure that it is unplugged. • To remove cuttings from the working area of ​​the working material, it is necessary to wait for the complete stop saws. • You need to select the blank of this size, which allow a tight fixing in the tool.

• After performing maintenance work, ensure that all parts Saws secured. Only then begin to work. • During downtime tool is recommended to switch it off from the network. • In the selection of the saw blade, make sure that it corresponds to the material that you are going to saw. • At a time when the saw blade cuts into the material, there is a risk of kickback.

Securely fix the workpiece. • For a thin material or a material with thin walls using saw blades with fine teeth.

• During operation, it is necessary to use saw blades with sharp edges, since the disc with a blunt edge increases the risk of kickback. • Workpiece during operation must be kept straight. • During manufacture, the grooves are not allowed lateral pressure on the disk clamp is used for its special adaptation. • From the preform remove all foreign bodies - nails, screws, etc. • Cutting is not allowed on the machine at the same time a few blanks. If the saw blade during operation captures some parts, it increases the likelihood of an accident.